Table of Contents
Advertisement
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
&
Select
Teletext level 2.5
é
Press the cursor right to select
to take advantage of this feature.
2.5 On
"
Press the cursor right again to select
if you like the more neutral
level 2.5 Off
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
is switched
Surround
Source
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
Decoder
Decoder
Setup
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select
with the cursor right.
Decoder
é
Select
Programme
8
.
Teletext level
Teletext
Auto
.
On
EXT1
EXT2
EXT3
SIDE
Programme
Status
.
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
press
.
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 3, and when you press the v key on
the remote control.
"
Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select
.
Status
• Select the input used to connect your
decoder:
None
,
• Select
if you do not want the selected
None
programme number being activated as a
decoder programme number.
Note: Select
EXT2
to your EasyLink video recorder.
.
. Follow the
in the General menu and
or
.
EXT1
EXT2
when the decoder is connected
Hide quick links:
Advertisement
Table of Contents
