General; Source; Decoder; Demo - Philips 29PT9009/12 User Manual

Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
& Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to Change code
instructions on screen.

Source

Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
& Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.

Decoder

Decoder
Setup
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select with the cursor right.
Decoder
é Select
Programme

Demo

TV
Setup
Auto demo
Demo
......
Install
Dealer demo - Digital options
8
.
. Follow the
EXT1
EXT2
SIDE
Centre input
Programme
Status
.
- Light sensor
- Comb filter
Important:You have forgotten your code !
&
Select
Change code
press .
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 3, and when you press the v key on
the remote control.
Centre input
When you have connected a Cinema Link
surround receiver to the TV (See separate
Cinema Link instruction manual supplied) and
you have selected
loudspeakers of the TV will act as centre
speaker, making a separate centre speaker
unnecessary.
" Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select .
Status
• Select the input used to connect your
decoder:
None
• Select if you do not want the selected
None
programme number being activated as a
decoder programme number.
Note: Select
EXT2
to your EasyLink video recorder.
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If has been selected the demo will
Auto demo
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the
Auto demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
in the General menu and
as centre input, the
EXT1
, or .
EXT1 EXT2
when the decoder is connected