Table of Contents
Advertisement
2. Introduction
The DVR5610 is a Rear Projection multi purpose display unit integrating DLP(Digital Light Processing)
technology that is targeted for multi media application and data processing applications. As such it will excel in
displaying real time video and graphics.
2.1. Digital Light Processing(DLP) by Texas Instruments
DLP5610 is a projection unit using a Texas Instruments' Digital Light Processing(DLP) technology optical
engine.
DLP system is constructed with the 1280 x 720 -DME(Digital Multi- media Engine) using s one- chip Digital
Micromirror Device(DMD)
2.2. DCDi deinterlacing/enhancement chipset
By Using FLI2300 video processing of Faroudja , Its feature including DCDi deinterlacing, reverse 3：2
pulldown film mode, motion adaptive 3D video noise reduction, cross-color artifact suppression and nonlinear
enhancement functions.
2.3. Key Features
2.3.1. Optical
Philips UHP-120W AC lamp system
400 nits using 0.8" HD2 DLP.
80% ANSI brightness uniformity (9pt ANSI)
1000 ： 1 contrast ratio (full-on ,full-off )
2.3.2. Mechanical
1381mm(W) x 1113mm (H) x 480mm (D)
The weight less than 130 lbs.
"Four point" foot system for stability
On screen display for inputs source select, keypads inputs intuitive
Target noise level less than 33db
Detachable connectors.(A/V ： include Video phone jack , S-video & Audio phone jack, Earphone
jack, (Data include Analog Mini D-sub 15pin, Digital DVI 24pin). and RF input.
2.3.3. Electrical
Dual DB-15pin connector for computer input Rear x1 , Front x1, 1280 x 720 native resolution)
Digital DVI 24pin for computer input.
Video input (3sets Video RCA jacks, 3sets S-video mini Din, 2set Components/HDTV video.
Audio input(6 sets Audio RCA jacks , Phone jack x 2sets for Data).
NTSC, NTSC4.43, and PAL video compatible
Lamp standby feature.
2 split of PIP/POP feature.
1x12, 1+ 7 and side by side picture.
Design in SRS/BBE system.
Two tuners for Cable and air TV.
Page3 of 79
Advertisement
Table of Contents
