Table of Contents
Advertisement
Display
Could not connect.
Wi-Fi connection
terminated.
Lens error. Try again
after turning the
camera off and on.
Communications
error
System error
Cause/Solution
The camera failed to establish the connection
while receiving the communication signals
from the smart device. Select a different
channel in Channel in Options in the Wi-Fi
options menu and establish the wireless
connection again.
The Wi-Fi connection is terminated in the
following situations:
When the signal strength is insufficient
When the battery level is low
When a cable or memory card was removed
and inserted
Use a sufficiently charged battery, disconnect
the TV, computer and printer, and then
establish the wireless connection again.
If the error persists, contact your retailer or
Nikon-authorized service representative.
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
An error occurred in the camera's internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
A
E50,
E93
E50,
E93
–
E54
F7
E109
Hide quick links:
Advertisement
Table of Contents
