Nikon COOLPIX S9900 Quick Start Manual page 193

Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1
Place a white or gray reference object under the lighting
that will be used during shooting.
2
Use the multi selector HI to
select Preset manual in the
White balance menu, and press
the k button.
The camera zooms in to the position for
measuring white balance.
3
Select Measure.
To apply the last measured value, select
Cancel and press the k button.
4
Frame the white or gray reference
object in the measuring window,
and press the k button to
measure the value.
The shutter is released and measurement is
complete (no image is saved).
B
Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
White balance
Auto Auto Auto
Preset manual
Daylight Daylight Daylight
Incandescent Incandescent Incandescent
Fluorescent Fluorescent Fluorescent
Cloudy Cloudy Cloudy
Preset manual
Cancel
Measure
Preset manual
Cancel
Measure
Measuring window
E63