Canon F-718SG User Instructions page 35

3. Input the start, end & step information
• Input the value, press
screens
• Input expression and display result value in following
screens are in Line mode status
• There are maximum of 30 x-values for generate function
table. The "Insufficient MEM" will be showed if you input
the start, end, step value combination is more than 30
x-values.
Display screen
Start?
End?
Step?
In Function Table Result screen, you cannot edit the
content, and press
f ( x) = x
Example:
the range
Key in operation
You should input:-
Input the lower limit of X (Default =1).
Input the upper limit of X (Default = 5).
*End value must be greater than the start value.
Input the increment step (Default =1).
return to Function Input screen.
3 2
+ 3x 2x
to generate the function table for
, incremented in steps of 1.
35
to confirm on the following
Display
f(x)=
3 2
f(x)= X +3X -2X