JVC KW-XC777 Service Manual page 8

KW-XC777
QQ
3 7 63 1515 0
<Cassette player section>
Prior to performing the following procedures, remove
the front panel assembly, the CD player section and
the cassette player section.
Removing the main board (See Fig.13)
1. Disconnect the card wire from connector CN972 on
the main board.
2. Remove the two screws L attaching the main board.
Removing the
assembly (See Fig.13 and 14)
Prior to performing the following procedure, remove
the main board.
TE
L 13942296513
1. Disconnect the card wire from connector CN972 on
the main board.
2. Remove the four screws M from the bottom cover of
the cassette player section.
Removing the connector board
Prior to performing the following procedure,
remove the cassette mechanism assembly.
1. Remove the screw N and move the connector
board in the direction of the arrow to release the
two joints c.
2. Disconnect the wire from connector CJ402 and
the card wire from CN403 on the connector
board respectively.
www
1-8
http://www.xiaoyu163.com
cassette mechanism
(See Fig.15)
x ao
y
. i
http://www.xiaoyu163.com
8
CN972
L
Cassette mechanism assembly
M
Q Q
3 6 7 1 3
CJ402
u163
.
2 9 9 4 2 8
Main board
Fig.13
Bottom cover
1 5 0 5 8 2 9 9 4
Fig.14
Connector board
Joints c
CN403
N
m
Fig.15
co
9 9
L
M
2 8 9 9