Viewing The Image At The Saved Image Quality (Memory Function); Saving A Memory; Loading, Deleting, And Renaming A Memory - Epson EH-TW6700W User Manual

Adjusting the Image
Viewing the Image at the Saved Image Quality
(Memory Function)

Saving a Memory

By using the memory function, you can register settings for Image from the Configuration menu, and then
load them when necessary.
a
Make the settings or adjustments you
want to register.
b
Press the
c
Use the
select Save Memory, and then press
the button to confirm the
selection.

Loading, Deleting, and Renaming a Memory

You can load, delete, and rename registered memories.
Press the button, and then select the target function on the screen displayed.
Function
Load Memory
Erase Memory
button.
buttons to
Loads the saved memory. When you select a memory and press the
button, the settings applied to the current image are replaced with the
settings from the memory.
Erases the registered memory. When you select a memory name and press
the button, a message is displayed. Select Yes, and then press the
button to erase the selected memory.
d
Use the
select the memory name to be saved,
and then press the
confirm the selection.
The current projector settings are saved to
the memory.
If the mark on the left of the memory name
is turned aqua, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select Yes, the
previous content is erased and the current
settings are saved.
Explanation
47
buttons to
button to