Wake Up Timer - Philips CCC192AT Owner's Manual

48 Wake Up Timer

The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the screen after you select WAKE UP at step 2. Then
the SET CLOCK menu will appear. Details are on pages 12-17.
Put a tape in the TV/VCR if you want the TV/VCR to start tape
playback at the specified time.
Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
1
Press the SLEEP/WAKE UP button.
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
> OFF
WAKE UP
ON-TIME
2
Press the PLAY/o o button or the STOP/p p button to select
WAKE UP. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select TV ON or VCR ON.
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
WAKE UP
> TV ON
ON-TIME
3
Press the PLAY/o o button or the STOP/p p button to select
ON-TIME. Then, press the REW(ind)/s s button or the
F.FWD/B B button to select your desired wake up time. Each
press of the REW(ind)/s s button or the F.FWD/B B button will
increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
WAKE UP
12:00 AM
ON-TIME
>
4
Press the STATUS/EXIT button.
5
Press the POWER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified time.
5
EJECT
POWER
MENU CLEAR
STATUS/EXIT
4
1 2
4 5
7 8
1
SLEEP/
ALT.CH
WAKE UP
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH.
MUTE
SPEED
TRACKING MEMORY
Helpful Hint
• To cancel the Wake Up Timer, press
the SLEEP/WAKE UP button. Press
the PLAY/o button or the STOP/p
button to select WAKE UP. Then,
press the REW(ind)/s s button or the
F.FWD/B B button to select OFF. Press
the STATUS/EXIT button.
2-3
3
6
9
VOL.