Timer Recording - Philips CCC192AT Owner's Manual

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV
programs while you're away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu. Details are on pages 12-17.
Channels are set. Details are on page 10.
A tape is in the TV/VCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program.
Complete each step within 60 seconds of completing the
previous step. If you don't, you may start again at step 1.
1
Press the MENU button.
PRIM. SETUP PRESS
> B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
VCR PROGRAM, then press the F.FWD/B button.
VCR PROGRAM
ONCE
>
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
a ONCE, DAILY, OR WEEKLY recording. Then, press
the F.FWD/B button.
ONCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
Daily
PROGRAM
Recording
(example)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
button to select
button to select
-1 2 3 4 5 6 7 8-
EJECT
POWER
1
MENU STATUS/EXIT CLEAR
1 2
4 5
7 8
SLEEP/
ALT.CH
WAKE UP
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH.
MUTE
SPEED
TRACKING MEMORY
Helpful Hints
• With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place dur-
ing the power failure.
• You cannot set a timer recording if
DEFEAT RECORDING is ON.
Details are on page 36.
2-3
3
6
9
VOL.