Blade Replacement And Sharpening - FGM STM60-318 Operator's Manual

LUBRICATION AND MAINTENANCE

BLADE REPLACEMENT AND SHARPENING

For best cutting results the Mower blades should be kept sharp. Ragged cut indicates the blade may be dull. The
blades should be sharpened when they become as shown in Figure 30 and should be replaced when they
become as shown in Figure 30 right Ⓑ.
TO REMOVE THE BLADE
Making it easier to replace the blade with safety.
1) Remove the mower from the tractor and turn it over.
WARNING: To avoid injury always be
careful when removing or installing
blades.
Your dealer can supply
authorized replacement blades. They
are made of special steel alloy and
subjected to rigid heat treatment and
inspection requirement.
blades may not meet these rigid
specifications and may be dangerous.
Figure 30
Wooden block
Figure 31
28
factory
Substitute