Lubrication - FGM STM60-318 Operator's Manual

LUBRICATION AND MAINTENANCE

LUBRICATION

GEAR BOX OIL
Checking Gear Box Oil Level;
Check the oil level every 25 hours.
1. With the Mower levelling position, and after the Mower has been stopped for a period of time, check the oil
level at the oil level check port.
2. If the oil level is lower than the plug, add oil to the gear box through the filler hole. Be careful not to overfill. Use
SAE 90 gear oil.
3. Install the filler plug and oil level stick.
Changing the Gear Box Oil;
Change the oil after the first 50 hours of operation and every 200 hours as follows:
1. Remove the mower from the tractor.
2. Stand the more vertically and place a block to prevent the mower from falling down.
3. Drain the oil by unscrewing the drain plug. Discard the oil.
4. With the Mower levelling position, add new oil until the oil reaches to the oil level check port. Use SAE 90 gear
oil.
5. Install the filler plug and oil level stick.
Figure 26
26