Kyosho INFERNO MP-7.5 sports Instruction Manual page 5

5
This kit contains screws and hardware in different metric sizes and shapes.
Before using them, check the screws on the true-to-scale diagrams on the left side in each assembly step. Some screws are extras.
SCREWS
Screw
Self-tapping (TP) Screw
Cap Screw TP F/H Screw
Flat Head (F/H) Screw Set Screw
6
Self-tapping (TP) screws cut threads into the parts when being tightened. Excessive force may
permanently damage parts when tightening TP screws. It is recommended to stop tightening when
the part is attached or when some resistance is felt after the threaded portion enters the plastic.
MEMO
BEFORE YOU BEGIN (2)
OTHER HARDWARE
Screw Washer Nut
3mm
3mm
12mm
F/H Screw Metal Bushing Bearing
5mm
3mm
12mm
10mm
E-ring
3mm
Pillow Ball
6.8mm
Correct
Wrong
Overtightened. The threads are stripped.
5