Kyosho INFERNO MP-7.5 sports Instruction Manual
  1. Manuals
  2. Brands
  3. Kyosho Manuals
  4. Motorized Toy Car
  5. INFERNO MP7.5 Sports 3 readyset
  6. Instruction manual

Kyosho INFERNO MP-7.5 sports Instruction Manual

1/8 scale radio controlled. 21 engine powered 4wd racing buggy
Hide thumbs Also See for INFERNO MP-7.5 sports:
Table of Contents

Advertisement

Quick Links

Before beginning assembly, please read these instructions thoroughly.
THE FINEST RADIO CONTROL MODELS
Please scroll down until you see the exploded view.
By just clicking on the part you need, you will be able
to order your spare part of upgrade.
INFERNO MP - 7.5
INDEX
RADIO PREPARATION
BEFORE YOU BEGIN
ASSEMBLY
ADJUSTMENT
OPERATING YOUR MODEL SAFELY
EXPLODED VIEW
© 2002 KYOSHO CORPORATION
R
REQUIRED FOR OPERATION
ARRANGEMENT OF PLASTIC PARTS ON RUNNERS
SPARE PARTS & OPTIONAL PARTS
*SPECIFICATIONS ARE SUBJECT TO BE CHANGED WITHOUT NOTICE.
INSTRUCTION MANUAL
UNDER SAFETY PRECAUTIONS
This radio control model is not a toy!
First-time builders should seek the advice of experienced modellers
before beginning assembly and if they do not fully understand any
part of the construction.
Assemble this kit only in places out of children's reach!
Take care before operating this model.
You are responsible for this model's assembly and safe operation!
Always keep this instruction manual ready at hand for quick
reference, even after completing the assembly.
SPORTS
2
3
3
4
5
6
7
8
25
25
26
27
31
33
34
37
No. 31192

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INFERNO MP-7.5 sports and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kyosho INFERNO MP-7.5 sports

Summary of Contents for Kyosho INFERNO MP-7.5 sports

  • Page 1 You are responsible for this model's assembly and safe operation! Always keep this instruction manual ready at hand for quick reference, even after completing the assembly. *SPECIFICATIONS ARE SUBJECT TO BE CHANGED WITHOUT NOTICE. No. 31192 © 2002 KYOSHO CORPORATION...

  • Page 2: Required For Operation

    Quick Fill Fuel Bottle Locking Jig & Wrench PAINT BRUSH Paint and Brush No.76301 76711 KYOSHO SPRAY COLOR No.2230 For painting the body, use Kyosho paints for models! POLYCA COLOR CAUTION: Before using spray colors, always read their explanations! No.1841 (1mm x 5m) No.96701...

  • Page 3: Radio Preparation

    Phillips Screwdriver (L.M.S) Hex Wrench (1.5mm, 2mm, 2.5mm, 3mm) RUBBER CEMENT Rubber Cement Wire Cutters Screw Cement LOCTITE Cross Wrench KYOSHO Special Glue Sharp Hobby Knife No.96154 Instant Glue Cross Wheel Wrench No.695101 No.1829 KNIFE EDGE REAMER ROUND CUTTER & SANDER No need to pre-drill! For trimming bodies.

  • Page 4: Before You Begin

    Read through the manual before you begin, so you will have an overall idea of what to do. Check all parts. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. How to read the instruction manual: No.4, No.5, No.6...
  • Page 5 BEFORE YOU BEGIN (2) This kit contains screws and hardware in different metric sizes and shapes. Before using them, check the screws on the true-to-scale diagrams on the left side in each assembly step. Some screws are extras. SCREWS OTHER HARDWARE Screw Self-tapping (TP) Screw Screw...
  • Page 6 ARRANGEMENT OF PLASTIC PARTS ON RUNNERS (1) No.2 Use the parts within the dotted lines as tunning options. Shaded parts are not used. No.3...
  • Page 7 ARRANGEMENT OF PLASTIC PARTS ON RUNNERS (2) No.6 Shaded parts are not used. No.7 Shaded parts are not used.
  • Page 8 are pre-assembled. Gear Differential (For front and rear) 4 x 4mm 5 8 x 16 x 5mm 4x4mm Set Screw Ball Bearing 11 4 x 10mm Shim 6 6mm O-ring For front and rear Flat surface 4 2.6 x 14mm Shaft (Black) (For center) For center...
  • Page 9 Tighten the set screw to the flat spot. Rear Gearbox 5x4mm 5 x 4mm Set Screw 4 x 15mm TP Screw Joint Cup (S) 4x15mm Chassis 4 x 15mm TP F/H Screw 4x15mm 4x15mm Front Gearbox 2.6 x 8mm TP F/H Screw 4x20mm 4 x 20mm TP Screw...
  • Page 10 Front Gearbox Tighten the set screw to the flat spot. 5 x 4mm Set Screw 5x4mm 4 x 20mm TP F/H Screw Joint Cup (L) 4x20mm 4x20mm Chassis 4 x 15mm TP F/H Screw 4x15mm 4x15mm Center Gearbox 3x10mm approx. 7mm 3 x 10mm Screw Brake Caliper...
  • Page 11 (Long) Center Gearbox 4 x 15mm (Short) TP F/H Screw 84 4mm O-ring 3 x 6mm F/H Screw 3x6mm 3x6mm 4x15mm 4x15mm START 4x10mm No.1, No.2 Rear Shock Stay 4x10mm 3 x 20mm Cap Screw 3 x 10mm TP Screw 3x20mm 3 x 12mm TP Screw...

  • Page 12: Rear Suspension

    Ò R Ó Ò R Ó maked. No.1, No.2 Rear Suspension For right side. 4 x 12mm Set Screw Ò L Ó E-ring (Silver) For left side. Ò L Ó marked. 38 3 x 48mm Shaft (Black) 5 8 x 16mm 4x12mm Ball Bearing Bottom...
  • Page 13 No.2 Rear Suspension 46 3 x 25mm Screw Pin 48 7.8mm Ball Holes for mounting. No.1, No.2 Chassis 3x15mm 3 x 10mm F/H Screw 3 x 15mm TP Screw Torque Rod Ball 58 6.8mm Ball End (L) 76 6.8mm Ball 3x10mm No.1, No.3 Front Shock Stay...

  • Page 14: Front Suspension

    4x10mm No.1, No.3 Front Suspension 4 x 10mm 5 x 4mm For left side. For right side. Cap Screw Set Screw ÒLÓ ÒRÓ ÒLÓ marked. 8 x 16mm ÒRÓ marked. Knuckle Collar Ball Bearing 2.6 x 17mm 4x10mm 5x4mm Shaft No.1, No.2, Only left side.
  • Page 15 No.1, No.3 Chassis 3 x 10mm TP Screw 4 x 20mm TP F/H Screw 3x10mm 4x20mm 3x10mm 3x3mm Center Gearbox 3x10mm 14mm No.1, No.4, No.6 Bend the rods if they contact the plate. 3x3mm Use thick one. 3 x 3mm Set Screw 3 x 10mm TP Screw...
  • Page 16 No.1, No.4, No.6 Steering Remove these screws and retighten after installing 4x10mm Long Short 24.5mm approx. 24.5mm 4x10mm Note the direction. 4 x 10mm 4x10mm Screw (Flanged) 4 x 10mm F/H Screw 3 x 15mm F/H Screw 4x10mm Flanged Nut 58 6.8mm 3x15mm Ball End (L)
  • Page 17 No.1 Engine Pulling starter as shown, settle the engine. Insert a sheet of paper before installing. 3 x 8mm Front 3x8mm Screw 3x8mm No.1, No.5 Muffler 3 x 10mm F/H Screw Nylon Nut 4 x 4mm Set Screw Washer Manifold 4x4mm Long Muffler...
  • Page 18 No.1, No.5, No.6 No.1876 3x15mm Fuel Tank To protect the engine from dirt infiltration, 3x15mm purchase Kyosho's No.1876 Fuel Filter. 3 x 15mm TP Screw 110mm Cut the Silicone Tube to 110mm Length. 3 x 10mm TP F/H Screw 60mm...
  • Page 19 Radio No.1 3 x 10mm TP F/H Screw 3x10mm 3x10mm 3x10mm 3x15mm 3x12mm Steering Servo Radio No.1, No.6 Throttle Servo 3x12mm 3 x 15mm TP Screw 3 x 10mm TP Screw 3x10mm 3 x 10mm TP F/H Screw 3 x 12mm Cords TP Screw (For transponder.)

  • Page 20: Throttle Linkage Adjustment

    3x3mm No.1, Throttle Rod Radio No.6 Servo Horn 2x8mm Throttle Rod 3x3mm 10mm approx. 10mm 98mm 10mm approx. 10mm approx. 7mm Parallel 3 x 3mm Set Screw 2 x 8mm TP Screw Spring 3x3mm 139 2mm Stopper Brake Rod 3x3mm 2x145mm Cut the Silicone Tube to 6mm Length.
  • Page 21 Engine Rainy Weather No.1, No.6 After putting the cover on, loosen the screw, fit in the plastic washer and screw in the 3 x 10mm screw again. TP F/H Screw No.1948 Soak inner sponge with oil. Air Cleaner Oil 3x10mm 2.6mm No.7 Shock...
  • Page 22 ( ) Ð No.7 (Short) Ð For Front Shock ( ) Ð 3x12mm (Long) Ð For Rear 165 6.8mm Ball (Black) 3 x 12mm TP Screw For Front For Rear Adjust Rear Shocks with this part, and make lower arms horizontal to chassis. <...
  • Page 23 No.6 Wheels < > < Front > 8x12mm In case of vibrations, insert a 8x12mm shim. 172 8 x 12 x 0.2mm Shim < > < Rear > Wheel Stopper Nut Side Guard No.1 3x10mm 3 x 10mm 3x10mm TP Screw Trim the shaded portion away so the exhaust pipe 3x10mm...
  • Page 24 Refer to the pictures on the After painting, remove the box for the color scheme. protective film from the body shell. Paint the body shell from the inside using KyoshoÕs spray colors. Apply decals to any spots you like. Decals...
  • Page 25 No.1 Body Shell Wing Plastic Washer Slightly bend the body pins as shown in the diagram for easier removal. Body Pin ADJUSTMENT Part bags used.

  • Page 26: Camber Adjustment

    Toe Adjustment (Front) Camber Adjustment Adjust the front toe either by making Adjust the front / rear camber either by making the tie rods longer or by making them the upper rods longer or by making them shorter. Toe - out Upper Rod shorter.
  • Page 27 OPERATING YOUR MODEL SAFELY WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents!) Always check the dry batteries in the radio! When the dry batteries get weaker, transmission and reception of the radio decrease. You may lose control of your model when operating it under such condition.
  • Page 28 If you use an engine other than the one included Option parts for using option engines. Engine for .21-class cars Plug Joining Pipe Manifold No.92515 No.39514 O.S.21RZ, Muffler Joining Pipe Manifold (O.S.21RZ, Picco, Nova Rossi) Only using a type of .21 class engine, which Muffler is made crank shaft...
  • Page 29 Insert a sheet of paper before installing. No.IF107 Front 4x10mm 4x10mm 4 x 6mm F/H Screw 4x6mm 4 x 10mm Flanged Cap Screw 4x6mm MEMO Must be purchased separately!
  • Page 30 In case using Stabilizer. (Optional Parts) IFW-104 IFW-104 Use optional parts No.IF-117. For Front IFW-104 Front Stabilizer Set 3x10mm 3x12mm 3x3mm 3x3mm 3 x 3mm Set Screw 3 x 4mm 5.8mm Set Screw Ball 3 x 10mm 5.8mm Set Screw Ball End (S) 3 x 12mm Screw...

  • Page 31: Exploded View

    < > EXPLODED VIEW Gear Differential IF102 IF39 IF39 Front / Rear ORG06 ORG06 IF101 IF102 BRG005 BRG005 IF102 IF103 IF106 BS107 IF102 IF101 Center IF102 IF39 IF39 ORG06 IF104 ORG06 IF102 BRG005 BRG005 IF102 IF104 IF103 BS107 IF102 IF148 Shock BSW73 Rear...

  • Page 33: Spare Parts

    SPARE PARTS FOR JAPANESE MARKET ONLY. Part Names Quantity Part Names Quantity 8x16x5) 2.6x17mm 54 x 4 BRG005 5 x 2 IF110 Shield Bearing (8x16x5) 2.6x17mm Pin 6.8mm 59 x 10 IF111 43 46 x 4 1500 BS46 Suspension Shaft Set 6.8mm Ball 16 17 x 1 49 x 2...

  • Page 34: Optional Parts

    SPARE PARTS FOR JAPANESE MARKET ONLY. Part Names Quantity Part Names Quantity 1701 IF150 68 x 2 KP/KY Fluorescent Strap (Pink,Yellow) 195 x 10 Front Wheel Shaft KC45 108 x 1set 109 110 x 1 1300 1707 Color Antenna (Yellow) 131 x 6 Special Clutch Shoe LD70 111 x 1...
  • Page 35 1795 96153 Screw Rescure KP/KY Fluorescent Silicone Tube Fluorescent Pink / Fluorescent Yellow 96154 1876 1000 Fuel Filter Shuts out dirt from fuel Kyosho Special Glue (14g) 1948 1000 96155 2000 Air Cleaner Oil Kyosho Special Primer (220ml) 250cc 695049 96421 SP Muffler Belt Set (.12-.15)
  • Page 36 FOR JAPANESE MARKET ONLY. Part Names Qty. Part Names Qty. Part Names Qty. 3000 96601 96607 96753 Silicone Oil (100) Silicone Oil (400) Silicone Oil (3000) 4000 96608 96602 96754 Silicone Oil (150) Silicone Oil (500) Silicone Oil (4000) 600 200 for shocks.
  • Page 37 "Kyosho Direct-Mail-Parts-Order-System" is available only for Japanese market. 0 0 2 1 0 4 4 7 2 7 1 1 6 8 0 0 0 2 1 0 4 4 7 2 7 1 1,400 1 6 8 0 1,680...
  • Page 38 No.31192...
  • Page 39 THE FINEST RADIO CONTROL MODELS http://www.kyosho.co.jp/ 243-0034 046 - 229 - 4115 ) 10 00 18 00 PRINTED IN JAPAN 61920212-3...

Table of Contents