HP Compaq 8000f Elite Quickspecs page 4

QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
On-site warranty and service¹: This three year (3/3/3) limited warranty and service offering delivers three years of parts, labor and
on-site repair. Response time is next business day² and includes free telephone support³ 24 x 7. Global coverage² ensures any
product purchased in one country and transferred to another non-restricted country will remain fully covered under the original
warranty and service offering. Some countries/regions do not offer one year onsite and labor.
1
Terms and conditions may vary by country. Certain restrictions and exclusions apply.
2
On-site services may be provided pursuant to a service contract between HP and an authorized HP third party provider, and is not
available in certain countries. Global service response times are based on commercially reasonable best effort and may vary by
country.
3
Technical telephone support applies only to HP configured, HP and HP qualified third party hardware and software. Toll-free
calling and 24 x 7 support may not be available in some countries.
Chipset Chipset Chipset Chipset
Intel Q45 Express supporting Intel Graphics Media Accelerator 4500 and Intel® Core™ 2 processor with vPro™ technology
Processors Processors Processors Processors
Intel Core 2 Duo Processors: Intel Core 2 Duo Processors: Intel Core 2 Duo Processors: Intel Core 2 Duo Processors:
Intel Core 2 Duo E7600 Processor
3.06 GHz, 3M L2 cache, 1066 MHz FSB
Intel Core 2 Duo E8400 Processor
3.0 GHz, 6M L2 cache, 1333 MHz FSB with vPro Technology
DDR3 Synchronous DRAM NON-ECC System Memory DDR3 Synchronous DRAM NON-ECC System Memory DDR3 Synchronous DRAM NON-ECC System Memory DDR3 Synchronous DRAM NON-ECC System Memory
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent
all possible memory configurations. The HP Compaq 8000f Elite Series PC supports non-ECC DDR3 PC3-10600 (1333 MHz)* and
PC3-8500 (1066 MHz)* memory.
* Memory bus speed is dependent on processor.
CAUTION: CAUTION: CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules. CAUTION:
Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an
active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory
modules or system board.
Supports up to 8 GB of DDR3 SDRAM using SO-DIMM modules. Slot 1 is black and must always be populated. Not all memory
configurations possible are represented below.
NOTE: NOTE: For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available NOTE: NOTE:
due to system resource requirements.
NOTE: NOTE: NOTE: NOTE: The Q45 chipset Graphics Memory Controller Hub (GMCH) supports DDR3 memory technology up to a maximum of 1066
MHz. Therefore, systems configured with PC3-10600 (1333 MHz) memory DIMMs will operate at 1066 MHz.
DA - 13528 North America — Version 9 — April 11, 2011
HP Compaq 8000f Elite USDT PC HP Compaq 8000f Elite USDT PC HP Compaq 8000f Elite USDT PC HP Compaq 8000f Elite USDT PC
Page 4