GlucoRx HCT Connect Owner's Manual page 14

"processing" message will appear on your Smart phone screen.
Your device will tag this measurement as QC test automatically.
5. Read and Compare the Result
After the "Processing" message appears, the glucose control
solution or ketone control result will then show on the display.
Compare this result with the range printed on your test strip vial
or ketone strip foil packet respectively; it should fall within this
range. If not, please read the instructions again and repeat the
relevant control test. With the ß-ketone control test, make sure
you turn off the switch on the front side of the ketone control
key after removing it from your device.
NOTE:
● The control solution range printed on your glucose test strip vial
or ketone strip foil packet is for control testing use only. It is not
a recommended range for your blood glucose or ketone level,
respectively.
● See the 'Caring for your Device' section for important information
about your control solution.
● There is no HCT display function while your device is in QC
mode.
14