Table of Contents
Advertisement
Install TV Setup
General
General
Setup
Menu background
Smart surf
Factory settings
Tilt adjust
OSD
Programme title
Teletext 2.5
Auto surround
Set/Change code
Colour
PLL
Source
Source
Setup
AV1
AV2
AV3
AV4
Side
This menu allows you to select the peripheral you
connected to one of the external inputs.
Demo
TV
Setup
Demo
Auto demo
Install
Teletext
Install
Main menu
Picture
Speakers
Active control
Dealer demo - Digital processing
8
This menu allows you to change various settings that are
presumably adjusted less frequently than most other settings.
Press the
about the selected menu item.
Set/Change code
&
Select
é
If no code exists yet, the menu item is set to
the instructions on screen.
If a code has previously been entered, the menu item is set to
Change code
All number combinations from 0000 to 9999 are valid numbers.
- Light sensor
- 3D Y/C Comb filter
i
key on the remote control to get information
or
Set
Change code
. Follow the instructions on screen.
&
Select
Source
é
Press the cursor down to select one of the
external inputs.
"
Press the cursor right to enter the list of
names of peripherals attached to the selected
input.
'
Select the peripheral device with the cursor
up/down.
Once you have selected the source, e.g.VCR, this
AV-input will automatically be selected when your
remote control is in VCR mode and when you
press the v key on the remote control. See p. 17.
The Demo menu allows to demonstrate the TV features
separately or in a continuous loop.
&
Select
in the Main menu with the cursor down.
Demo
é
Select
Auto demo
cursor right and press the
control.
If
has been selected the demo will
Auto demo
automatically present all the features sequentially in a
loop.
Press one of the cursor keys to stop the Auto demo.
If one of the features has been selected, this particular
feature demo will run one time only, until activated
again, and the Demo menu will reappear.
Select Dealer Demo
Select
Digital processing
Comb filter On
picture quality.
In Dealer Demo mode it is possible to change channels
with
and to adjust the volume.
-P+
Note: the Dealer Demo is not part of the automatic
sequence and can only be activated separately.
with the cursor down.
Set code
with the cursor right.
or one of the features with the
key on the remote
OK
,
Light sensor
or
to really see the difference in
Off
. Follow
and
3D Y/C
Advertisement
Table of Contents
