Location Of Printed Boards; Dismantling - Philips DFR9000 Service Manual

www.freeservicemanuals.info

LOCATION OF PRINTED BOARDS

Power Supply
Digital I/O Video I/O
VPB
Standby
Supply
Front Left Front Keys Front I/O
3-1
AM/FM Tuner
ASP DAB Speaker Terminal
Front Control Front Right

DISMANTLING

• Remove top cover (2 screws on the left, 2 screws on the
right, 5 screws on the rear)
• Remove front (4 screws on top, 4 screws on bottom)
• Remove air channel (4 screws in corners)
• Remove safety cover
• Loosen frame screws (2 screws on the left, 2 screws on
the right, 3 screws on the rear, 1 screw on the bottom)
• Loosen snaps and pull out frame as shown below
DAB Interface
UCD Amplifier
2 Pull out frame
Published in Heiloo Holland
3-1
1 Loosen left&right snap
13/10/2016