Technical Support Information; Power Supply And Power Cable; Lens; Digital Connector And Cable - Uniq UC-600 User Manual

6. Camera accessories

6.1 Power Supply and Power Cable

12 V DC regulated power supply with 1A current output or better is recommended. This camera uses Hirose 12-pin
connector for power source. The matting cable plug connector can be purchased through distributors or UNIQ and the Hirose
part number is HR10A10P12S. UNIQ provides power supplies and power cables as "one stop shopping" for customers.
Alternatively, the power supplies and power cables can be purchased through power supply and cable vendors. Contact
UNIQ for vendor list.

6.2 Lens

C-mount lens is the standard lens for UC-600 camera. There are a variety of C-mount lenses in the market that
works with UC-600 camera. Make sure the quality and specification of the lens match the camera's application.
Some of the most popular lenses in the market, such as Cosmicar, Fujinon, Rodenstock, and Schneider, are
recommended.

6.3 Digital Connector and Cable

UC-600 utilizes high quality, subminiature D-sub connectors and very flexible twisted paired, overall shielded
cable for interfacing UC-600 digital camera and frame grabbers. Lists of UC-600 camera and various frame
grabbers cable pinout are available. UNIQ also stocks all custom cables for customer's conveniences. Contact
us for more details.
The mating cable plug connector and back shell kits can be obtained through AMP.
AMP: 749111-3 cable plug connector with covers.
AMP: 749192-1 back shell kits with latches.
12