DeWalt DWF83PT Instruction Manual page 10

Framing nailer
Table of Contents

Advertisement

Available languages

Available languages

WARNING: Always know the tool operating mode before
connecting to an air supply and/or using the tool.
SEQUENTIAL TRIP-
1. Push and hold in pivot pin (I) opposite
the selector, while rotating the selector (J)
180° counterclockwise to the sequential
trip position
.
2. Ensure the selector is fully seated in the
new position.
To operate the nailer in sequential trip
mode:
1. Depress the contact trip firmly against the
work surface.
2. Depress the trigger.
WARNING: A nail will fire each time the
trigger is depressed as long as the contact trip remains depressed.
CONTACT TRIP -
1. Push and hold in pivot pin (I) while rotating
the selector (J) 180° clockwise to the
contact trip position .
2. Ensure the selector is fully seated in the
new position.
To operate the nailer in contact trip mode:
1. Depress the trigger.
2. Push the contact trip against the
work surface. As long as the trigger is
depressed, the tool will fire a nail every
time the contact trip is depressed. This
allows the user to drive multiple nails in
sequence.
WARNING: Do not keep trigger depressed when tool is not in use.
Loading the Tool (Fig. 1, 6)
WARNING: Connect tool to air supply before loading
FIG. 4
fasteners, to prevent a fastener from being fired during
connection. The tool driving mechanism may cycle when tool is
connected to the air supply. Do not load fasteners with trigger or
contact trip depressed, to prevent unintentional firing of a fastener.
WARNING: Keep tool pointed in a safe direction when loading
nails.
WARNING: Never load nails with the contact trip or trigger
activated.
I
1. Slide the pusher (E) to the base of the magazine to lock it in place.
2. Hold the nailer with the magazine facing downward and insert
the appropiate collated nail sticks in tho the back of the magzine
NOTE: See Tool Specifications to determine appropriate nail
sizes and angles.
3. Pull pusher (E) back again to release and carefully allow pusher to
slide forward until it makes contact with the nails.
FIG. 5
J
8
FIG. 6
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwf83wwDwf83pl

Table of Contents