Table of Contents FCC and Safety Information ... 3 Important Safety Instructions ... 4 Cautions ... 5 DVD Disc Format and TV Format ... 6 Remote Control Functions ... 7 Front View ... 8 Chapter 1. DVD 1-1 DVD Playback ... 9 Basic Playback ...
FCC and Safety Information CAUTION: This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this unit near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Cautions Please read these precautions before operating this unit. ! ! ! ! ! Power cord protection To avoid unit malfunctions and to protect against electric shock, fire or personal injury, please observe the following. " Hold the plug firmly when connecting or disconnecting the AC power cord. "...
DVD Disc Format and TV Format DVD discs have the material recorded in the PAL and NTSC systems. Refer to the table below to select the correct disc type for the type of connected TV. ! ! ! ! ! Connecting to the multi-system TV ! ! ! ! ! Connecting to the NTSC TV...
Front View LCD screen COLOR Adjustment SPEAKERS BRIGHTNESS Adjustment LCD button SETUP button INFO. button MENU button PAUSE/UP button PLAY/SEL. button F.FWD/RIGHT button STOP/DOWN button NEXT button PREVIOUS button F.BWD/LEFT button OPEN button Note: The screen aspect ratio to 16:9, 4:3, or NORMAL by pressing LCD button several times.
Press MENU. This portable DVD player stops playback, and then displays the menu screen. After operation When this portable DVD player is not in use, remove the disc and press POWER to turn off the player and close the display panel.
DVD Playback -continued Fast Forward and Fast Reverse) By the remote control: F.BWD or F.FWD Press " Normal playback can be resumed by pressing PLAY/SEL. " The speed of fast forwarding ( F.FWD or F.BWD button. Skipping Ahead or Back to Chapters Skipping Ahead Press NEXT during playback.
" When you turn on or remove the disc, this portable DVD player will use the language which is selected at the initial setting. If you select a language which is not recorded on the disc this portable DVD player will playback a prior language programmed on the disc.
This portable DVD player provides a MUTE function for your selections. Press MUTE button during playback. " When “MUTE” appears on the screen, this portable DVD player is muted. To restore the audio, press the button again. “MUTE OFF” will appear on the screen. Using a DVD Menu Some DVD discs have unique menu structures called DVD menus.
DVD functions -continued Playing Kodak Picture CDs and JPEG picture CDs With this DVD player you can view Kodak picture CDs and JPEG pictures for viewing on the screen. Basic Playback Load a Kodak picture CD or a JPEG picture CD. After few seconds, the player starts to display the pictures in slide show automatically.
Playing a JPEG picture with MP3 music You can select your favorite JPEG picture to display on the TV screen while playing MP3 music. Load a disc containing MP3 music and JPEG pictures. This portable DVD player starts playing the JPEG pictures in slide show automatically.
Audio CD Playback Preparations Apply power to the unit and connect the headphones. To connect the player to external equipment: " Apply power to the TV set and select “Video” as the TV input. " Apply power to the stero system if the player has been connected to a stereo system. "...
Audio CD Playback Rapid Advance (Rapid Reverse) Using the remote control: F.BWD or F.FWD Press " Normal play is resumed by pressing " The speed of forward ( x4, and etc.) or reverse ( F.FWD or F.BWD button. Skipping Ahead or Back to Tracks Skipping Ahead Press NEXT during playback to advance to the next audio track.
Language Setup On Screen Display (OSD) Language Setting Allows you to set various languages for the on screen display (OSD). Press SETUP. to select “LANGUAGE SETUP” then press PLAY/SEL. Press to select “OSD” then press PLAY/SEL. Press Press to select the desired language. Press PLAY/SEL.
Language Setup AUDIO Soundtrack Language Selection [DVD] You can select a preferred soundtrack language among various languages that have been recorded on DVD discs. Press SETUP in the stop mode. to select “LANGUAGE SETUP” then press PLAY/SEL. Press to select “AUDIO” then press PLAY/SEL. Press Press to select a preferred language.
Screen Setup SCREEN SAVER Setting To enable the screen saver feature perform the steps below: Press SETUP SETUP SETUP SETUP in STOP SETUP STOP mode STOP STOP STOP button to select “SCREEN SETUP” and press PLAY/SEL. 2 Use button to select “SCREEN SAVER”. 3 Use button to select “ON”...
The player provides “PAL”, “NTSC” and “AUTO” settings for your selection. Video output changes according to the playback disc’s recorded fromat. When connecting this portable DVD player to your TV, set the “TV SYSTEM” from the on-screen display to the format that is compatible with your TV’s system. Set ”NTSC” from on-screen display if connecting to NTSC TV system, set “PAL”...
Screen Setup -continued BRIGHTNESS Setting You can adjust the brightness of the video with this setting to provide a comfortable view. Using the BRIGHTNESS Adjustment button: Gently press the BRIGHTNESS Adjustment button, rotate the button in a clockwise or a counter clockwise direction for the desired brightness setting.
Custom Setup Note: “Custom Setup” only works without disc inside this portable DVD player. PARENTAL CONTROL Setting [DVD] A built-in viewer rating setting enables you to lock the videos that you do not want children to view. you set the player to PG-13, the player will not play the videos rated R, NC-17 or X unless the correct password is entered.
“ON” or “OFF” and press PLAY/SEL. Press NOTE: Whether the ANGLE MARK is set to ON or OFF with this setting, when you press the ANGLE button, this portable DVD player will still playback multi-angles that are available on the video discs. DEFAULT Setting You may restore all settings to factory default settings in CUSTOM SETUP.
Audio Setup OUTPUT Setting [DVD] This portable DVD player provides two types of audio outputs; 2-channel stereo sound and digital sound output. Press SETUP in the stop mode. to select “AUDIO SETUP” and press PLAY/SEL. Press to select “OUTPUT” and press PLAY/SEL.
Troubleshooting Before requesting service for the player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. SYMPTOM (COMMON) No power.
Disc Handling and Maintenance Handling Precautions " Hold the disc by the edges so the surface will not be soiled with fingerprints. (A) Fingerprints, dirt and scratches can cause skipping and distortion. " Do not write on the label side with a ball-point pen or other writing utensils. "...
Definition of Terms Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.