Charging Battery; Turn Phone On Or Off - Gsmart Classic LTE User Manual

Install memory card
To remove the memory card
(1) For safe removal, tap
(2) Push memory card to eject it from slot.
To set default storage

Tap Storage & USB

1.3 Charging Battery

Battery has been partially charged at factory, you may need to recharge it before you can
switch on phone for the first time.
(1) Connect USB cable to AC adapter  connect to device via USB cable.
(2) Plug AC adapter to socket  start charging.
(3) For safety, only use original charger that comes with your device. Any possible damage
caused by using non-original charger or any other equipment will not be under GIGABYTE
Communication Inc.'s liability.
NOTE:
CHARGE PHONE IMMEDIATELY IF BATTERY IS LOW. CHARGE FOR AT LEAST 10
MINUMTES TO REACTIVATE BATTERY IF IT IS OVERDISCHARGED.
For safety, don't remove battery from phone while AC adapter is connected or while it is
being charged.
1.4 Turn Phone on / off
Turn phone on
Press and hold power button until phone shown GSmart logo.
Turn phone off
(1) Press and hold power button for few seconds.
(2) A pop-up window appears  tap "Power off".
 Storage & USB  tap

Default write disk to set default storage.
Classic LTE｜6
Unmount SD card