Chapter 3 Using The Internet; Connecting To The Internet; Bluetooth Modes - Gsmart Classic LTE User Manual

3.1 Connecting to the Internet

Your phone connects to the Internet via:
 Wi-Fi
 GPRS/ EDGE/ 3G/ 3.5G/ HSPA+/4G
NOTE:
If you connect to the Internet, you may be charged.
you need to tap > Data usage
Tethering & portable hotspot
1. Share your phone's mobile data connection via USB, Bluetooth, or as a portable Wi-Fi
hotspot.
2. Tap > More > Tethering & portable hotspot.
3. You can turn on/off USB tethering, Portable Wi-Fi hotspot, Bluetooth tethering and
configure the Wi-Fi hotspot settings.
VPN settings
1. Tap > More > VPN.
2. Tap to edit VPN network.
3. You must set lock screen pattern, PIN or password before using credential storage.
Please tap "OK" go to Unlock selection, then choose which way you want to lock the
screen.
4. After you set it up. It will go back to VPN screen.
5. After filling in all necessary information, tap "Save" to finish the settings.
To start a data connection
If you set up multiple data connections, select the connection you want to use.
1. Tap > SIM cards > Cellular data.
2. Choose a SIM card you want to enable data access over Mobile network.
Enabling data roaming
Please set up your data connection first, and then follow the steps as below:
1. Tap > Data usage >
2. Tap or slide Data roaming to turn it on .

3.2 Bluetooth modes

Bluetooth on your phone operates in three different modes:
 On: Bluetooth is turned on. Your phone detects other Bluetooth devices, but your phone is
not visible to others.
 Discoverable: Bluetooth is turned on, but your phone is not visible to other Bluetooth
devices.
 Off: Bluetooth is turned off.
To turn on/off Bluetooth
1. Tap > Bluetooth.
2. Switch or tap to turn it on.
3. Tap the device's name to make your device visible to others.
3. Using the Internet
to unmark data enabled.
> Cellular networks.
Androis 6.0｜8
If you want to stop the connection,