Charging Battery - Gsmart ELITE User Manual

Remove SIM card
Turn off phone  slide SIM card out.
NOTE:
4G Data Service (if the SIM card supports)
• 4G data service is switchable between SIM1 and SIM2.
• One SIM card:
The inserted SIM slot will be assigned to 4G by default.
In SIM1
In SIM2
• Two SIM cards:
4G in SIM1 by default and switchable to SIM2.
Factory default
User switchable
 SIM cards  Cellular data to select a SIM for data
Tap
• Data on/off switch: tap
Battery
Phone comes with a battery. Battery life may vary depending on availability of local networks
and individual usage.
Replace back cover
(1) Insert cover into slot from the bottom.
(2) Press all around back cover fully until hearing clicks.
Memory card
Micro SD card might be required to store photos, music, videos and other data if internal
memory is full.
Install memory card
To remove the memory card
(1) For safe removal, tap
(2) Push memory card to eject it from slot.
To set default storage
 
Tap Storage

1.3 Charging Battery

Battery has been partially charged at factory, you may need to recharge it before you can
switch on phone for the first time.
(1) Connect USB cable to AC adapter  connect to device via USB cable.
4G in SIM1
4G in SIM2
SIM1
4G & 3G
2G
 Data usage  cellular data
 Storage  Unmount SD card  OK.
Default write disk to set default storage.
Elite｜5
SIM2
2G
4G & 3G