Basic Operations; Cd/Usb Operations - LG CM9940 Owner's Manual

0
18 OperafMg
Basic Operations
CD/USB Operations
1. k_sert the disc by pressing =_ or connect the
USB device to the USB port.
2. Select the CD or USB function by pressing CD or
USB on the unit or FUNCTION on the remote
control.
To
Stop
Playback
Pause
Searching
for a section
within a track/
file
Selecting
a track/file
directly
Skipping to
the next/
previous
track/file
Playing
repeatedly or
randomly
Do this
Press m ENTER on the remote
control or [] on the unit.
Press I_/1! on the remote control
or>11on
the unit.
Press I_/1! on the remote control
or >ll on the unit during playback.
Press I_/ID,€_I on the remote
control or ]<_/_*_] on the unit
during playback and release it at
the point you want to listen to.
Press 0 to 9 numerical buttons on
the remote control to go to the
desired file or track directly.
During playback,
(1) By using 141t_I/DH_I buttons:
Press I_/DH_I to go to the
next track/file or to return to the
beginning of the current track/file.
Press I_t._ twice briefly to step
back to the previous track/file.
(2) By using FILE SEARCH knob :
Rotate FILE SEARCH on the unit
and press I_/1! to play the track/
file.
Press REPEAT(MENU) on the
remote control repeatedly. Refer
to the note for details about the
display change.
®
USB
REPEATTRK
REPEAT_DIR
REPEATALL
RANDOM
OFF
@ Note
The display changes in the following order.
MP3 MACD
REPEATTRK
REPEAT DIR
REPEAT ALL
RANDOM
OFF
A_diO C D
REPEATTRK
REPEAT A LL
RANDOM
OFF
_DIR : Directory
When you play JUKE BOX list, only REPEAT
TRK and REPEAT ALL are available.
Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it's last been
played.
The next file name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last file of playlist, etc.)
If you leave the disc tray open for 5 minutes,
it will dose automatically.
, The DTS is not supported. In case of DTS
audio format, audio is not output.
Selecting a folder and
an MP3/WMA file
On the unit
1. Press FOLDER and rotate FILE SEARCH until a
desired folder appears.
2. Press ENTER and rotate FILE SEARCH until a
desired file appears. Press ,_]] to play it.
On the remote control
1. Press PRESET.FOLDER A/V repeatedly until a
desired folder appears.
2. Press I_/ll to play it.The first file of folder will
play.