Page 1
Instruction DP58P Pedestal Drilling Manual Machine IMPORTANT For your safety read instructions carefully before assembling this product. Save this manual for future reference. Woodworking Machines & Accessories Telephone: 0870 770 1777 Email: sales@recordpower.co.uk Facsimile: 0870 770 1888 http://www.recordpower.co.uk...
Terms and conditions Record Power guarantees the mechanical parts of its machines against faulty construction for a period of 5 years from date of purchase. The guarantee is limited to the obligation to repair or replace any parts which prove to be faulty.
1. General Safety Instructions Read instructions Carefully before using this product. General Chuck Guard The machine must be fastened down to a bench or other rigid The chuck guard should always be in position when the machine structure before use. is being used.
3. Unpacking & Checking Contents 1. Separate all parts from packaging materials and check each item, Make sure all items are accounted for before discarding any packing material. ITEM DESCRIPTION Table Column support asm. Owners manual Box of loose parts Bag of loose parts Base Head asm.
5. Assembly Refer to the diagram to install all parts correctly, tighten the screw and bolts securely 1. Base 2. Column support asm. 3. M10 x 1.5-40 screw (x4) 4. Head asm. 5. Table 6. Feed handle 7. Clamp - column lock 8.
10. Spare Parts Spare part diagram 1 Spare part list for diagram 1 1-1. Screw-hex soc set 1-11. Support column 1-2. Collar rack 1-12. Screw-hex HD M10 x 1.5 - 40 1-3. Gear rack 1-13. Screw-hex soc set M10 x 1.5 -12 1-4.
Page 10
Spare part diagram 2 Spare part list for diagram 2 2-1. Nut lock 2-7. Key chuck 2-2. Locking ring 2-8. Chuck 2-3. Washer 2-9. Arbor 2-4. Bearing ball 2-10. Key drift 2-5. Washer rubber 2-11. Spindle 2-6. Tube quill 2-12. Bearing ball...
Page 11
Spare part diagram 3 Spare part list for diagram 3 3-1. Retaining ring 3-11. Pulley motor 3-2. Bearing ball 25mm 3-12. Knob 3-3. Spacer 3-13. Screw pan HD M5x0.8-12 3-4. Belt “V” M24 3-14. Pivot idler 3-5. Nut pulley 3-15. Pulley centre 3-6.
Page 12
Spare part diagram 4 Spare part list for diagram 4 4-1. Motor adjusting knob 4-17. Rocker switch 4-37. Motor bracket support 4-2. Screw socket set M10x1.5-12 4-18. Switch key 4-38. Hex HD M8x1.25-20 screw 4-3. Handle belt tension 4-19. Switch plate Cover 4-39.
Page 13
EU Declaration of Conformity Cert No: EU / DP58P / 1 RECORD POWER LIMITED, at Unit B, Adelphi Way, Ireland Industrial Estate, Staveley S43 3LS declares that the machinery described:- Type: Pedestal drilling machine Model No: DP58P Serial No .................