Advertisement
Original Instruction Manual
DS19 Drill Stand
Version 3.0
April 2014
It is important to register your product as soon as possible in order to receive efficient after sales
support and be entitled to the full 5 year guarantee. Your statutory rights are not affected.
Kg
Always wear safety glasses when
using woodworking equipment.
To register this product please visit
www.recordpower.info
Please see back cover for contact details.
Important
i
For your safety read instructions carefully before
assembling or using this product.
Always read the instructions
provided before using
Save this manual for future reference.
woodworking equipment.
Advertisement
Related Manuals for Record Power DS19
Summary of Contents for Record Power DS19
- Page 1 Original Instruction Manual DS19 Drill Stand Version 3.0 April 2014 To register this product please visit www.recordpower.info It is important to register your product as soon as possible in order to receive efficient after sales support and be entitled to the full 5 year guarantee. Your statutory rights are not affected.
-
Page 2: Table Of Contents
Contents Explanation of Symbols General Health & Safety Guidance Record Power Guarantee Getting to Know Your Machine Specifications Contents of the Package Assembly & Operation Parts List & Diagram 1. Explanation of Symbols THE SYMBOLS AND THEIR MEANINGS SHOWN BELOW MAY BE USED THROUGHOUT THIS MANUAL. -
Page 3: General Health & Safety Guidance
2. General Health & Safety Guidance Ensure that you carefully read and fully understand the • Some machines have optional wheel kits available to allow them to instructions in this manual before assembly, installation and be manoeuvred around the workshop as required. Care should be use of this product. - Page 4 2. General Health & Safety Guidance • Keep the work area well lit and ensure that there is artificial lighting area to prevent a trip hazard. available when there is insufficient natural light to effectively 19. Guard against electric shock light the work area.
- Page 5 30. Check for damaged parts bypass or modify the interlocks to allow the machine to be used without the guards in place. • Before each use of the machine, it should be carefully checked to determine that it will operate properly and perform its 27.
-
Page 6: Record Power Guarantee
Guarantee this Guarantee should be made directly to Record Power Record Power guarantees that for a period of 5 years from or its Authorised Distributor (for details of the Authorised the date of purchase the components of qualifying Products Distributor in your country please see your Product manual (see clauses 1.2.1 to 1.2.9) will be free from defects caused... -
Page 7: Getting To Know Your Machine
4. Getting to Know Your Machine Depth Stop Rise and fall handle Axle Headstock Locking Knob Drill clamp Column Base Drill Not Included 5. Specifications Stroke: 67 mm Throat Depth: 125 mm Holding Collar: 43 mm Weight: 6.6 kg Size: H500 x W175 x D260 mm... -
Page 8: Contents Of The Package
6. Contents of the Package Headstock and column Base 38 - 43 mm collar adaptor Rise and fall handle Hexagonal wrench Locking knob and 13 mm bolt... -
Page 9: Assembly & Operation
Handle shaft Fig. 7.3 Installing the Powered Drill The DS19 is designed to hold powered drills with a standard collar size of 43 mm. Included with the machine is a 38 - 43 mm adaptor for smaller drills. Drill clamp... - Page 10 7. Assembly & Operation cont. Setting the Depth Stop Fig. 7.5 Depth stop rod To set the depth stop on the headstock, press the depth stop lock (Fig. 7.5) and adjust the height of the depth stop rod. Release the depth stop lock to secure the rod at the required height.
- Page 11 7. Assembly & Operation cont. Fig. 7.9 Bench How to Reduce Movement in the Headstock Fig. 7.10 If you find there is some movement in the headstock of your drill stand then Phillips screw loosen the Phillips head screw located on the side of the headstock then retighten to eliminate any play (Fig.
-
Page 12: Parts List & Diagram
8. Parts List & Diagram PART No. DESCRIPTION QUANTITY PART No. DESCRIPTION QUANTITY Base Spring plate Blind set screw M16 x 12 mm Position key Column Hex bolt M8 x 35 mm Carriage bolt M12 x 30 mm Head M8 hexagonal nut Pan head screw M3 x 8 mm Knob Cover... - Page 16 Woodworking Machinery & Accessories United Kingdom Eire Australia New Zealand Record Power Ltd Record Power Ltd Tools 4 Industry Tools 4 Industry Centenary House, 11 Midland Way, Centenary House, 11 Midland Way, Po Box 3844 Po Box 276079 Barlborough Links, Chesterfield,...