Installing/ Removing The Battery Pack - Kenwood TK-D240 User Manual

INSTALLING/ REMOVING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before
use.
CAUTION
◆ Do not short the battery terminals or dispose of the battery by
fi re.
◆ Never attempt to remove the casing from the battery pack.
1 Align the battery pack with
the back of the transceiver,
then press the battery pack
and transceiver fi rmly together
until the release latch on the
base of the transceiver locks.
2 To remove the battery pack, lift
the safety catch on the base
of the transceiver, then press
the release latch underneath
the safety catch.
3 While pressing the release
latch, pull the battery pack
away from the transceiver.
11