Table of Contents
Advertisement
Hardware & cabling
You can connect a pair of speakers, an AV system,
a TV, or all three to a single Nexus Q.
The following pages describe some of the most
common configurations. Others are possible,
depending on the equipment you have available.
For information about the way output from different
ports is synchronized (also known as delay
compensation), see
Audio calibration.
Speakers (banana plug cables)
What you need:
• Two speakers rated 15 watts RMS or higher
@ 8 ohms.
• Speaker cables with banana plugs on at
least one end for connecting the cables
to your Nexus Q (and on both ends if your
speakers use banana jack connectors).
Banana plugs are labeled R and L and color
coded with a black or red dot.
8
Advertisement
Table of Contents
