Operating procedure
Iris operation
1
Set the auto/manual iris selecting switch at the front of
the lens drive unit to "M" position.
Auto/Manual iris
selecting switch
Caution
When the manual iris operation is performed, be sure to
set the auto/manual iris selecting switch to "M" position
before use.
If the manual iris operation is forcibly performed with "A"
position, the lens may result in damages.
2
Adjust the iris by rotating the iris ring of the lens
manually.
Turn the iris ring clockwise, viewed from the camera, to
close the iris, and lower gain.
Turn it counterclockwise, viewed from the camera, to
open the iris, and raise gain.
Close
Open
Iris ring
Macro operation
To operate the macro, manually turn the macro button at the
back of the lens.
Press the macro button to unlock the macro ring.
While holding it down, turn the macro ring clockwise as
viewed from the camera side to allow macro shooting.
1
Set the lens to wide-end by manual.
2
Bring the object into focus by turning the macro button
(macro ring).
Macro button
14 (E)
Macro ring