Distributing A Content List - Sharp PN-Y326 Operation Manual

Distributing a content list

You can distribute the contents of a content list (copy the contents to a USB flash drive or SD memory card connected to a panel
in a format that enables auto play).
1. Select the content list to be distributed.
2. Click .
The screen below appears.
3. Select the checkboxes of the panels to which you want to distribute the content list.
To distribute to all panels, select the "All" checkbox.
4. Click "OK".
The content list is distributed to the selected panels.
5. When distribution is completed, the distribution result appears. Check the result and click "OK".
To check detailed information, click "Show distribution log". The distribution log consists of the following information.
Date and time
Result
Result details
Content list name
Panel name
IP Address
Location
TIPS
• During distribution, do not perform any operations on an external memory device (USB flash drive or SD memory card) that is
connected to the panel. The data may not be properly retained.
• If you cancel while distribution is in progress, the panel power may turn off or data may not be properly retained.
• If distribution was not successful, you can click "Redistribute" to retry distribution.
• Distribution will not be possible if there is insufficient free space in the USB flash drive or SD memory card. In addition to
space for the content, working space is also required. Make sure that the free space is sufficiently larger than the content to
be distributed.
14
E
Date and time content list was distributed
Distribution result (See page 21.)
Details of distribution result (See page 21.)
Name of distributed content list
Information (panel name) registered in the software
Information (IP address) registered in the software
Information (location) registered in the software