Various Logs - Sharp PN-Y326 Operation Manual

This section explains the results that appear in various logs (Distribution log, Distribution log by schedule, and Distribution log by
panel)
n Normal end / cancel operation
Result
Complete [Model name] [Media distributed to] Distribution completed normally.
Cancel Distribution cancelled by cancel
operation
n Authentication error
Result
Authentication Telnet authentication error
error
FTP authentication error
n Distribution error
Result
Distribution Unknown file [XXX]
error
No content to be distributed
No panel to distribute to
n Panel error
Result
Panel error Unsupported model [XXX]
Error during change to power
standby
Input change error [XXX]
Data retrieval error [XXX]
Panel restart error
Panel FTP OFF
Mode change error [XXX]
n Communication error
Result
Communication Telnet error
error
FTP error

Various logs

Result details
Distribution has been canceled.
Result details
Appears when unable to connect to a panel, or the Telnet Username
or Password is not correct.
Appears when the FTP Username or Password is not correct.
Result details
XXX indicates the name of a file that could not be found during
distribution. This appears when a file cannot be found because the
location of the file has changed or the file has been deleted.
Appears during scheduled distribution if there is nothing in the
content list being distributed does not exist.
Appears during scheduled distribution if there is nothing to which the
content list is being distributed does not exist.
Result details
The acquired model name appears in XXX. Appears when a non-
supported panel model is registered.
Appears when a panel fails to change to the standby mode.
Appears when panel input mode selection failed. XXX indicates the
target input for which the change error occurred.
Appears when retrieval of panel data failed. XXX indicates the data
that could not be retrieved. Appears as [media type] even when
external memory is not connected to the panel.
Appears when restart of panel failed.
Appears when the panel's FTP setting is "OFF".
Appears when the panel's auto play mode could not be changed.
("XXX" is the auto play mode that stipulated the mode change.)
Result details
Appears when panel control fails. Also appears when the panel
power is off.
Appears when communication of panel data fails. Also appears
when data cannot be copied to external memory.
Description
Description
Description
Description
Description
21
E