Setting Ez News Flash - Win W63K Basic Manual

Setting EZ News Flash

EZ News Flash can be used after performing a simple setting procedure
(free of charge).
Set EZ News Flash after performing "Initializing E-mail and EZweb"
(→Page 22).
1
When the standby screen is displayed,
C
press
+
press
2
Select "はい"(Yes), press
(Select), and press
The setting is complete.
After you complete the settings and return to
the standby screen, you will see a telop with
the message "Next bulletin coming soon. Please
wait." run across the standby screen.
Note
● Perform the following steps to cancel the News Flash service.
When the standby screen is displayed,
) [メニュー](Menu)→select "サービス設定解除"(Undo Service Settings), a
+ [選択](Select)→select "YES", c
+ [Select]→select "OK", c
● To change the News Flash update notification tone/vibrator settings or
the incoming call lamp settings, perform the following steps.
When the standby screen is displayed,
"NewsFlash Rcv"→Set volume and time etc.
If you do not need notification of updates, set "Volume" and "Vibrator" to
"OFF".
66
. Select the telop and
[OK].
+
+
[Select].
+ [Select] c
[選択]
C →select the telop, c
+ [選択](Select)→select "解除する"(Undo), c
+ → c 2 → !
+ [OK]→ c
1 → ! 5 !