Sony GTK-XB5 Operating Instructions Manual page 20

Enjoying the Party Chain
1
Plug in the AC power cord
and turn on all the systems.
2
Adjust the volume on each
system.
3
Activate the Party Chain
function on the system to be
used as the Party Host.
Example: When using this system
as the Party Host
 Press FUNCTION
repeatedly to select the
function you want.
When you connect using 
(page 18), do not select the
Audio In function. If you select
this function, sound cannot be
output.
 Start playback, then press
PARTY CHAIN.
The PARTY CHAIN indicator
lights up. The Party Host starts
the Party Chain, and other
systems become Party Guests
automatically. All systems play
the same music as that being
played by the Party Host.
Notes
• Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the music.
• Changing the volume level and sound
effect on the Party Host will not affect the
output on the Party Guests.
• For detailed operation on other systems,
refer to the operating instructions of the
systems.
20
GB
To select a new Party Host
Only when you connect using 
(page 18), you can select a new
Party Host. Repeat step 3 of "Enjoying
the Party Chain" on the system to be
used as a new Party Host. The current
Party Host becomes Party Guest
automatically. All systems play the
same music as that being played by
the new Party Host.
• You can select another system as the
PAIRING
• If the selected system does not become a
To deactivate the Party Chain
Press PARTY CHAIN on the Party Host.
If the Party Chain function is not deactivated
after a few seconds, press PARTY CHAIN on
the Party Host again.
The Party Chain indicator on the
unit lights up or flashes to show the
system status.
System status
Party Host
Party Guest
Notes
new Party Host only after the Party Chain
function of all the systems in the chain
has been activated.
new Party Host after a few seconds, repeat
step 3 of "Enjoying the Party Chain."
Note
Party Chain indicator
Indicator status
Lit up
Flashing