Block/Clear All Channels At The Same Time - Philips 27PT6341 User Manual

BLOCK/CLEAR ALL CHANNELS AT THE SAME TIME

T T T T T
his is a continuation of the previous page. his is a continuation of the previous page.
block or clear all the channels at the same time. block or clear all the channels at the same time.
Once you've entered your access code and the AutoLock features displayed on the screen;
1
Press the CURSOR < or > to select either
CLEAR ALL or BLOCK ALL.
2
If CLEAR ALL is selected, press CURSOR > to
clear all blocked channels. All channels will be
viewable. Now all blocked channels can be viewed.
If BLOCK ALL is selected, press CURSOR > to
turn the control ON or OFF. When ON is
selected, ALL available channels will be blocked
from viewing.
3
When finished, press the STATUS/EXIT button
on the remote control to remove the menu from
the screen.
NOTE : If you forget your code, key 0 7 1 1. This is the
factory default. Enter this code to create a new access
code.
After blocking specific channels there may come a time when you want to
Clear All
Block All
MENU
27
AutoLock
Block Channel
Setup Code
Clear All Clear ?Stop Time
Block All Channel
Movie Rating Activate
TV Rating Display
Cleared
AutoLock
Block Channel
Setup Code
Clear All
Block All Off
Movie Rating
TV Rating
On
STATUS / EXIT
< >
VOL