Table of Contents
Advertisement
COMPONENT VIDEO (CVI) INPUT CONNECTIONS
C
omponent Video inputs provide for the highest possible color and picture resolution on the playback of digital signal
source material, such as with DVD players. The colour difference signals (Pb, Pr) and the luminance(Y) signal are
connected and received separately, which allows for improved color bandwidth information (not possible when using
composite video or S-Video connections).
1
Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player (or
similar device) to the (Y, Pb, Pr) in(put) jack
on the TV. When using the Component Video
Inputs, it is best not to connect a signal to the
AV in Video Jack.
2
Connect the red and white AUDIO
CABLES to the Audio (left and right) output
jacks on the rear of the accessory device to the
Audio (L and R) AV Input Jacks on the TV.
3
Turn the TV and the DVD (or digital
accessory device) ON.
4
Press the AV button on the remote control
to scroll the channels until CVI appears in the
upper left corner of the TV screen.
5
Insert a DVD disc into the DVD player and
press the PLAY Æ button on the DVD Player.
H
H
ELPFUL
The description for the component video
connectors may differ depending on the DVD
player or accessory digital source equipment
used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr,
Cb). Although abbreviations and terms may
vary, the letters b and r stand for blue and red
color component signal. Refer to your DVD or
digital accessory user manual for definitions and
connection details.
The CVI connection will dominate over the AV1 in Video Input.
When a Component Video Device is connected as described, it is best
not to have a video signal connected to the AV1 in Video Input jack.
Video Cables
(Green, Blue,
INTS
Back of TV
Monitor
out
VIDEO
1
L/Mono
AUDIO
R
Component
Red)
COMP VIDEO
Y
3
Accessory Device
Equipped with
Component Video
4
11
2
CVI
AV2 In
AV1 In
Y
Pb
S-VIDEO
R
Pr
Audio
Cables
(Red &
White)
S-VIDEO
VIDEO
AUDIO
Pb
R
OUT
OUT
OUT
Pr
L
5
Outputs
VOL
Advertisement
Table of Contents
