Start Up - Kärcher K 55 Operator's Manual

START UP

Installing the wall unit
The wall mount is to be used for storing
the appliance and the charger.
Fix the enclosed wall mount at an
easily accessible point near to a
socket - the fastener is enclosed.
Insert the brush roller
The brush roller has not yet been in-
serted in the appliance at the time of de-
livery. Please insert the brush roller
before starting the appliance.
Turn the casing.
Insert the brush roller in the side-in-
take.
Press in the holder of the brush roller
into the intake and check that it is sit-
ting properly.
Installing the telescopic handle
and adjusting the handle height
The telescopic strut consists of 3 parts.
While assembling it, make sure that the
parts lock into each other.
Insert the handle on the longer strut
with turning handle.
Insert together the longer and short-
er struts; while assembling it, press
the locking button.
Insert the entire strut with the locking
button into the joint on the appliance.
Loosen the handle and pull out the
strut to the desired working height;
turn the handle to the correct posi-
tion and tighten using the turning
handle.
Inserting and charging the battery
The battery has not yet been inserted in
the appliance at the time of delivery.
Please insert the battery before com-
missioning the appliance.
Remove the rechargeable battery
from its packing.
Insert the battery into the intake until
it locks.
Charge the battery: The battery can
be charged when it is in the appli-
ance or removed from it. Note: The
following section describes the
charging process when the battery is
in the appliance.
Insert the charger delivered with the
appliance into a proper socket.
5
English