Advertisement
3-Axis G-Sensor Settings
The device is equipped with G-Sensor. It triggers Emergency Recording
automatically when impacts are detected. To avoid false detections during
initial installation, G-Sensor function is defaulted as OFF. Please activate
this function manually after the device has been properly installed.
Off(Default)
Emergency Recording Function
1.
Users may manually activate Emergency Recording function by
pressing the orange button on the device in the event of accident.
Aa yellow triangle will show up on the screen when this function is
activated.
2.
The device will save recorded footage within the prior 10 seconds
and subsequent 50 seconds (total 1-minute video) as an individual
file into the emergency recording folder. The files will be protected
from loop recording until it's capacity has been filled up.
Special Note:
If the power source is removed during Emergency Record or the
backup process, the device will continue finishing this process
next time when it's powered up. It will take longer for it to finish
processing.
English
10
High
Medium
Low
Advertisement
