Samsung 193P Service Manual page 13

4 Alignments and Adjustments
4-4 OSD Adjustment for Panel Replacement
1. Repeat 1, 2 and 3 in above 4-2.
2. Press the key and hold until Information is selected.
Figure 4-3.
3. Press the key again to execute Information.
4. Press the key and hold until Panel is selected.
Figure 4-4.
5. Press the key again to change information for Panel.
6. Select Save and Exit to save the change settings and exit from Service Mode.
Select Cancel and Exit to cancel the change settings and exit from Service Mode.
Figure 4-5.
❇ The below section explains the SVC function. Please read this information first for application.
4-2
Figure 4-6.
DI19PS