Table of Contents
Advertisement
Installation
d) Cut the cable as needed (recommended to remain a certain margin), strip the
cable thread, clamping terminals and wire to ceramic terminal block. Wiring order
(from left to right): ground, phase A, phase B )
e) Banding the cable outside of the device firmly with nylon band onto the hook ring
in order to protect the cable.
f) Turn the breaker to "on" position and re-install front panel.
5) Water supply hose
Install the filter according water flow direction (arrow downward) on the filter. Con-
nect to the water supply= valve with ½ inch stainless steel metal hose. (See Fig.8)
h6) Drain pipe
Connect one end of the drain pipe with 15 inch steel hose (or hose with wire).
Connect the other end to the waste drain.
WARNING: Kitchen sewer must be away from this machine.
8
Advertisement
Table of Contents
