Installing the heatsink
1.
Place the heatsink on the system board.
2.
Tighten the screws to secure the heatsink to the computer.
3.
Install the:
a.
battery
b.
base cover
4.
Follow the procedure in
LED board
Removing the LED board
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
3.
To release the LED board:
a. Peel the adhesive tapes to access the speaker cable [1].
b. Release the speaker cable from the computer [2].
28
After working inside your
Before working inside your
computer.
computer.