Ironing; Vertical Steam - Bosch TDS60 SERIES Operating Instructions Manual

2
1
2x
5"
15 cm
10
B O SC H
1 Place the iron on the garment or fabric you want to
disinfect.
2 Continuously press the steam release button (15) to
release powerful shots of hygienic steam. Slowly iron
the whole garment to enhance the final result.
Note: The energy saving setting "Eco" cannot be activated
while the "Hygiene" programme is selected.

4. Ironing

1 Press the steam release button (15) for ironing with
steam.
Important: When placing the iron on the pad, be sure to
first insert the heel in the upper side of the control panel,
as shown in the figure.
Tip: For better ironing results, iron the last strokes without
pressing the steam release button (15) to dry the garment.
"PulseSteam" function
This appliance has a special function for tackling difficult
creases.
Press the steam release button (15) two times in
1
quick succession (double-click). Powerful shots of
steam will be released.

Vertical steam

Can be used to remove creases from hanging clothes,
curtains, etc.
1 Choose the "max" setting by turning the selector (1).
2 Hold the iron in an upright position 15 cm away from
the garment to be steamed.
3 Press the steam release button (15) repeatedly with
pauses of at least 5 seconds.
Warning! : never point the steam jet at garments being
worn, or at people or animals.
* Model dependent