Action Camera AC32 User Manual page 26

3. Setting Slide
During the ride recording, you can scan different slides with
different High Information.
By setting "Slide", you can either choose to scan these slides
automatically by setting the interval time or switch these slides
manually.
Select "slide" by pressing the Enter button
"slide" interface.
Select "5sec"or "10sec", the slides with different High
Information will switch automatically every 5 or 10 seconds.
Select "off" to disable the slide effect. You need to switch the
interfaces with different High Information manually by pressing
the Left button
Notes:
1.
The High Information may display one of these parameters:
distance, speed/pace, calories or Time.
If one of these parameters has been selected as the Low
Information, (Refer to point 2 in section"6.6") it cannot be
presented in the High Information area. For example, if "time"
is selected to be the Low Information, it will not be presented
in the High Information area once more.
or the Right button
。
25
to enter the