Taking Photos - Action Camera AC32 User Manual

press and hold the Power
and it will start recording.
Tip:
The first time when you conduct video recording, if no GPS
signal is received, the display will show "GPS signal is not
acquired, the recording video may not contain accurate geo
information" and then jump to the ride interface.
To stop Recording, slide the Recording Slide Switch to reveal
the letter "STOP" .The camera will vibrate and the LED indicator
will illuminate GREEN to indicate the recording has stopped.
The camera will then enter the Standby mode.
An additional option is to hold the Power
recording and turn the camera off. The camera will vibrate and
the Red LED light will turn off.
Notes:
1. Changing video resolution is disabled during video recording.
2. There will be around 2-3 seconds delay before the camera
starts recording.
3. Assure there is sufficient memory available on the micro SD
card. If the card is full, the camera will vibrate for five seconds
and the Green LED will flash continuously.
4. You can playback video with GPS information using the
Kinomap software (to be downloaded separately).
5. Please visit:
http://www.kinomap.com/#!download/kinomap_uploader
_pc to download the Kinomap software.

5.3 Taking Photos

Turn on the camera by pressing the
1. Take a photo in Single mode
button to turn the camera ON
button.
12
button to stop the