Action Camera AC32 User Manual page 14

To capture a Photo, make sure the camera is in Single mode.
Refer to section 6.9.
Press and release the
vibration and a flash of Green LED indicate the action was
successful.
2. Take photos in Time Lapse mode
Time Lapse mode captures a series of photos at 10 seconds, 30
seconds or 1 minute intervals.
To capture a Time Lapse series, make sure the camera is in
Time Lapse mode. Refer to section6.9.
Press and release the
countdown. The Green LED will flash once and the camera will
vibrate each time a photo is taken.
To stop Time Lapse:
Press the
return to Standby mode.
Note:
When you start the recording or turn off the camera, the
time-lapse mode will be cancelled.
3. Take a photo in Self-timer mode
To avoid shaking of the camera, a tripod is recommended.
To capture a Photo, make sure the camera is in Self-timer mode.
Refer to section6.9.
Aim at the object you wish to take photos of. Press and release
the button. The photo will be taken after the timer reaches
the delay time of 2 or 10 seconds.
If you have selected 2 seconds as the delay
time:
During the countdown the Green LED will flash rapidly
and the camera will vibrate when the photo is taken.
button to take a photo. A short
button, the camera will initiate a
button to stop and exit the Time lapse mode and
13