Table of Contents
Advertisement
15:Buttons
ITEM
Button
General Display
Mode
(TRIP)
Setting Mode
Escape
from
Setting
Mode
Operation Status
Remarks
SPECIFICATION
Left-Hand: MODE Button
Press
SET
for 3 seconds to reset TRIP at "00.0".
Press
MODE
and
Mode", then 『Hour：MIN』start flashing.
(1) When『Hour』flashing:
Press
SET
to increase of number, then press
『MIN』.
(2) When『MIN』flashing:
Press
SET
to increase of number, then press
『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press
SET
to choose "km/h" or "mph" type, then press .MODE
Mode" of 『°C / °F』
(4) When『°C』or『°F』flashing
Press
SET
to choose °C or °F .
Under setting mode, if below situations happened, will auto save the last setting value then
escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press
MODE
and
(1) 『Hour：Min』,『km/h』or『mph』,『°C』or『°F』offer Cyclical Switch function.
(2) When adjusting 『Hour：Min』, press
more than 2 seconds, the number will increase continuously until button released, setting
value with Cyclical Switch function (only 2 seconds from 0 to 9).
* If『Hour』less than 10, the denary "0" doesn't display.。
Button tones: one short "Bi" sound
www.vitamobilitywerks.com
Right-Hand: SET Button
SET
simultaneously for more than 2 seconds. to enter "Setting
SET
at same time for more than 2 sec.
SET
25
MODE
to enter "Setting Mode" of
MODE
to enter "Setting Mode" of
to enter "Setting
to increase number, if press
SET
for
Advertisement
Table of Contents
