Vita Mobility Werks V15 User Manual page 20

6.Headlight Control
ITEM
Operation Feature
Power Saving Mode
Usage Condition
Determinant
Condition
Remarks
7.Back-up Lamp control
ITEM
Operation Feature
(Control Mode)
Brake-lamp Mode
Reversing-lamp Mode
Usage Condition
SPECIFICATION
Take exterior headlight switch as determinant signal.
(1) Switch on/off the head light by pressing button
on/off simultaneously.
(2) LCD backlights turn on / turn off with headlight.
When motor stops, the modulation down to 30% (Headlight)
When motor acts, 100% output power (Headlight)
While (a) KEY OFF (b) Power-Saving mode (c) Sleep mode, all functions closed.
(1) 2.2V＞WIP＞2.8V ( 100% Full-power )
(2) 2.2V＜WIP＞2.8V ( 100% Full-power )
(3) Power saving mode /Full power output: instant reaction
Full power output/ Power saving mode: 5 seconds delay
(1) Loop Load: 24V/50W max
(2) With "short circuit" and "overload" protection
SPECIFICATION
Take exterior back-up lamp switch as determinant signal.
(1) Switch on/off the head light by pressing button
turn on/off simultaneously.
(2) LCD backlights turn on / turn off with headlight.
When motor changes from act (go forward) to stop, the lamp reinstated after flashing
for 5 sec.
Determine as "Reversing Mode", back-up lamp keep flashing.
Reverse warning sound can be set by panel (Turn on / Turn off)
While (a) KEY OFF (b) Charging Mode (c) Sleep Mode, all functions closed.
* Brake-lamp & Reversing-lamp Mode won't be limited by Back-up lamp switch on or
off.
www.vitamobilitywerks.com
20
once, then LED will turn
once, then LED will