Technical Specifications - Velleman MONCOLHA5PN3 Manual

5. Beware
• During installation, verify if you are not damaging any electric wires, fuel, brake or exhaust systems, other hoses
or any other item that can affect the operation of the vehicle.
• To avoid electrical hazards, do not open the housing of the monitor.
• Use only the supplied DIN cable to establish connections.
• To disconnect: power down the unit, disconnect the cable at the video source side first and then disconnect it
from the monitor.
• Do not use chemical agents to clean your MONCOLHA5PN3. Remove dust and stains with a damp cloth only.

6. Technical Specifications

Screen Size
System
Power source
Power consumption
Video input
Operating temperature
Storage temperature
Display method
Resolution (HxV)
Backlight
7. Wiring
The information in this manual is subject to change without prior notice.
MONCOLHA5PN3
5.6 inch
PAL & NTSC
12Vdc +/-10%
<700mA
Composite video signal
0 ~ 60°C
-20 ~ 80°C
TFT Active Matrix System
960x234 dots
Cold cathode tube
Power: black connector
V1 in: video input 1 ; yellow connector.
Audio in: red connector.
V2 in: video input 2: white connector.
- 2 - VELLEMAN