Velleman MONCOLHA7PN2 Manual

MONCOLHA7PN2 – 7" TFT LCD 16/9 Monitor with Remote Control
1. Introduction
At the end of its life cycle, dispose of this product in accordance with local and national disposal regulations.
Thank you for buying the MONCOLHA7PN2. We advise you to read this manual before you bring the device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
This is a light CRT monitor with low radiation and no distortion. Power consumption is minimal and the construction
materials are nature-friendly. This 7" TFT LCD monitor uses a DSP chip and offers a clear picture and true colours.
2. Features
• IR remote control
• OSD display
• setting mode with automating store function
• automatic recognition of NTSC/PAL signal guarantees a clear picture

3. Specifications

Screen Size
Display Format
Effective Display Dimensions
System
Video Input
Audio Input
Power Supply
Current
Power Consumption
Operating Temperature
Storage Temperature
4. Front Panel Description
1. IR Window Sensor for remote control IR signals.
2. Power LED Is lit when the device is activated.
3. MODE Sets an aspect ratio of 16:9 or 4:3.
4. SYS Image is: 1-rotated 180° ; 2-mirrored ; 3-
flipped (=180°+mirrored) ; 4-normal.
5. AV button Select source: video 1 or 2.
6. "-" button To lower the volume (standard) or the
value for the selected parameter (#7).
7. SEL button Select a parameter (order: brightness /
colour / contrast / tint). Adjust with + & -.
8. "+" button To increase the volume (standard) or the
value for the selected parameter (#7).
9. Power switch Press this button to activate/deactivate the monitor. The indicator (#2) lights up to indicate that
the device is active.
10. TFT LCD
11. Connector Input jack.
MONCOLHA7PN2
7" (diagonal)
1440 (RGB) (H) x 234 (V) = 336960 pixels
154.1 x 85.5mm
NTSC/PAL (automatic recognition)
1.0Vp-p (75Ω)
-10dB (10kΩ)
DC11V-14V (e.g. PS1205R)
≤ 800mA
≤ 10W
5 to 40°C
-10 to +80°C
- 1 -
Fig.1
VELLEMAN