Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Swann MALARM1301012E
Summary of Contents for Swann MALARM1301012E
- Page 1 English Wireless Alarm Kit MALARM1301012E...
- Page 2 Important Information FCC Verification NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Warranty Information
Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centers. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin. - Page 4 Introduction Congratulations on your purchase of this Swann Wireless Alarm Kit. You’ve chosen a versatile security solution that’s great for almost any home or small business that is as easy to install as it is to stick a double-sided piece of tape to something.
- Page 5 The Door/Window Sensors The included Window/Door Sensors are Trigger extremely reliable, and will be triggered every time the door on which they are Siren mounted is opened. When the two parts of the sensor are extremely close to one another (ideally touching) the sensor is deactivated.
- Page 6 The PIR Sensors The Passive InfraRed (PIR) Motion Sensor will, under typical conditions, detect a human being moving around within approximately thirty-three feet (about 10m) from the sensor. This is an average value, as the actual detection range is between 16ft/5m and 50ft/15m. As the performance of the sensor is determined primarily by environmental conditions, no guarantees can be offered regarding the detection range.
- Page 7 Placing the PIR Motion Sensors The PIR motion sensors have an effective range of between 16ft/5m and 50ft/15m depending on the specific conditions of the environment. Typically, the sensor will have a longer range in colder conditions, or in evenly heated environments. The opposite is also true - environments with uneven temperatures (such as part of the area in sunlight and other areas in shade) or consistently high temperatures will lower the effective range of the sensor.
-
Page 8: Arming / Disarming The System
Arming / Disarming the System The Remote Controls are the keys to your Wireless Alarm system. Treat them with the same care and attention you would your physical keys: if you lose the remote controls, then you won’t be able to easily disarm the Wireless Alarm System. The remote controls will operate reliably at a range of up to approximately 10m (about 33ft). - Page 9 Batteries Both the Window/Door Sensors and PIR Motion Sensors require batteries, as does the remote control. These are necessary for the alarms to be able to transmit an active wireless signal. The functionality of the sensors is reliant on the batteries providing power in much the same way as a smoke detector.
-
Page 10: Troubleshooting
Troubleshooting Problem: I keep getting false alarms! Solution: There are a few possible reasons why this might be occurring. Check that there are no strong magnetic fields around your Window/Door Sensor(s). Things like televisions, computers, microwaves and (of course) magnets of any kind will interfere with the proper operation of the Window/Door Sensor and could lead to false alarms. -
Page 11: Technical Specifications
Technical Specifications Receiver Power Requirements DC 4.5V (3 x AA batteries, not included) Wireless Frequency 433MHz ± 0.5MHz Alarm Siren Volume ≥ 100db Working Temperature -10C° ~ +40C° Relative Humidity Tolerance ≤ 90% Number of Paired Devices Door/Window Sensor Power Requirements DC 4.5V (3 x LR44 batteries, included) Wireless transmission frequency 433MHz ±... -
Page 12: Helpdesk / Technical Support Details
Swann Technical Support All Countries E-mail: tech@swann.com Telephone Helpdesk Helpdesk / Technical Support Details USA toll free AUSTRALIA toll free 1-800-627-2799 1300 138 324 (Su, 2pm-10pm US PT) (M 9am-5pm AUS ET) (M-Th, 6am-10pm US PT) (Tu-F 1am-5pm AUS ET)